A nylon material adhesion, water product characteristics

[Jiong Sheng brand] - nylon material adhesion water specifically applicable adhesion problems appeared in the process of nylon material spraying, such as PA66, PA+30%, PA+50%, glass fiber, glass fiber. This nylon material adhesion of water attached to good effect, can effectively solve the adhesion.

Two, nylon material adhesion water operation method

(1). Will need nylon material surface treatment to wipe clean, remove grease or release agent surface residual.

(2). The nylon material adhesion of water spray or wipe in to deal with the nylon material, coating film thickness control in 3-5, UIM, baking temperature of 65 degrees, the time is 5 minutes

(3). The painting ink or paint, rest for 5-10 minutes.

(4). The coating is good at 80 ℃ forced drying 30 minutes the best.

Three, nylon material adhesion bottom note

(1) to avoid in the spraying process, make nylon material adhesion bottom - water contact with eyes or skin, such as inadvertently, please with plenty of water and soap water cleaning, when necessary, timely medical treatment.

(2) nylon material adhesion of water for a period of 12 months, should be stored in cool (30 ℃) dark, well-ventilated place, away from fire.

(3) nylon material adhesion of water after open to promptly sealed, to avoid failure

Four, nylon material adhesion water packaging specifications

25 kg / barrel